Bearing World Journal

Volume 5 - 2020

Table of contents

Simulation Based Design of an Intelligent Hybrid Plain Bearing for Forming Machines
Clément Eberhardt, Fraunhofer Institute for Machine Tools and Forming Technology, Chemnitz, Germany

Calculation Method to Evaluate the Risk of WEC Occurrence in Industrial Applications
Dirk-Olaf Leimann, Belgium

Enhancement of the Insulation Properties of Thermally Sprayed Ceramic Bearing Coatings
Elisa Burbaum, RWTH Aachen University, Germany

Microstructural Analysis of Bearing Steels by a Statistical Nanoindentation Technique
Esteban Broitman, Research and Technology Development, SKF B.V., The Netherlands

Influence of Off-Centered Gear Load Distribution on Planetary Bearing Outer Ring Creep
Felix M. Schlüter, RWTH Aachen University, Germany

A Fatigue Life Model for Roller Bearings in Oscillatory Applications
Georg Breslau, TU Dresden, Germany

The Influence of Mechanical Stresses on the Diffusion and Accumulation of Hydrogen in a Cylindrical Roller Thrust Bearing
Iyas Khader, German Jordanian University, Amman, Jordan

Finite Element Analysis of Two-step Deep Rolling of Bearing Steel for Expansion and Equalization of Compressive Residual Stress Profiles
Jürgen Gegner, University of Applied Science Würzburg-Schweinfurt, Germany

The Utilization of Production-Related Defects for Improving Operating Properties of Journal Bearings
Lars Friedrich, Chemnitz University of Technology, Germany

Bearing Selection for high Efficiency Worm Gear Drives
Manuel Oehler, Technische Universität Kaiserslautern, Germany

Dynamic Simulation of Full Complement Cylindrical Roller Bearings with a Semi-Analytical Roller End-Flange Contact Detection Method
Marius Wolf, Corporate Research, Robert Bosch GmbH Renningen, Germany

Surface Mutation of the Bearing Raceway During Electrical Current Passage in Mixed Friction Operation
Simon Graf, Institute of Machine Elements, Gears, and Transmissions (MEGT), Kaiserslautern, Germany

Full-Size Test Bench Measurements and Validation of a Novel Conical Sliding Bearing for the Main Shaft of Wind Turbines
Tim Schröder, RWTH Aachen University, Germany

Measuring the Kinematic Behavior of the Rolling Elements in a Spindle Bearing under Axial and Radial Loads
Hans-Martin Eckel, RWTH Aachen University, Germany

Microinclusions Impact on Steel Balls Fatigue Life
F. Morosi, Tsubaki Nakashima, Italy